Model MF-360

A Multi -Purpose Tractor, High PTO Power, Diesel Turbo Charged Engine.

PERFORMANCE
Maximum engine power @ 2,250 rpm/min 60 (B.S) hp*
Maximum torque @ 1,350 rpm 212 Nm
Maximum PTO power at rated engine speed 48 hp**
*Certified to BS AU 141a
**Manufacturer’s estimate
ENGINE
Make /Type Diesel /T3.1524
No. of cylinders 3
Injunction Direct
Bore 91.4 mm
Stroke 127.0 mm
Capacity (liters) 2.54 liter
Compression ratio 16.5 :1
Starting aid Thermostat
Throttle Control Hand and foot
Cooling Water
Air Cleaner Type Oil bath
Air Pre-Cleaner Over bonnet, air swirl
Fuel filter Dual, High capacity
Exhaust Vertical Muffler under bonnet
ELECTRICS
Voltage 12V, negative earth
Battery 118 Ah
Starter 2.2 kW
Alternator 32 Amp.
CLUTCH
Type Dual Clutch
Diameter 305×254 mm
TRANSMISSION
Type Sliding spur
Number of gears 8 forward, 2 reverse
Road speed at 2,250 engine rpm with 14.9/13-28 rear tyres
Gear Speed (kph)
Forward 1 (first low) 2.6
Forward 2 3.8
Forward 3 5.2
Forward 4 7.0
Forward 5 (first high) 10.4
Forward 6 15.2
Forward 7 20.8
Forward 8 28.0
Reverse 1 (low) 3.5
Reverse 2 (high) 14.1
POWER TAKE OFF
Type Live
Engine speed @ 540 PTO rpm 1,789 rpm
Shaft diameter 35 mm
No. of spleens 6
HYDRAULICS
Functions Draft Control, Position Control, Response Control, Constant Pumping
Pump Type Reciprocating Ferguson Pump
Maximum Oil Flow 16.70 liter/min
Maximum Pressure 21.2 MPa
at normal operating temperature
Max. lift capacity with lower links horizontal 2,145 kg
Cat. I & II with interchangeable balls
Lower Links Cat. 1& 2 with interchangeable balls
Front AXLE
 Type Box Section, Adjustable
STEERING
Type Hydrostatic
REAR AXLE AND BRAKES
Brake Type Oil immersed,
multi-disc
Brakes Actuation Hydraulic
Axle Type Straddle with Epicyclic reduction Unit
Parking Brakes Hand Lever Operated
Differential Lock Mechnical
INSTRUMENTATION
Gauges Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature
Warming lights Direction indicators, Battery charge, Headlight main beam Low engine oil pressure Brake lights & Auxiliary socket
TYRES
Front 7.50-16 (6 PR)
Rear 14.9/13-28 (6 PR)
TRACK ADJUSTMENT
Front axle 1,275 – 1,884 mm
Rear axle 1,438-2,125 mm
WEIGHT AND DIMENSIONS (Approximately)
(with 7.50-16 front and 14.9/13-28 rear wheel and with full fuel, oil and water)
Weight
Gross Weight 2,010 kg
Dimensions
Wheel base 2,032 mm
Overall length 3,353 mm
Overall Width 1,890 mm
Height
Over Exhaust 2,236 mm
Over Steering Wheel 1,499 mm
Turning Circle
With brakes 5,867 mm
Without brakes 6,833 mm
Ground clearance (under gear box) 400 mm
CAPACITIES
Fuel Tank 47.5 L
Engine sump 6.8 L
Cooling system 11.7 L
Hydraulic system 36.0 L
Steering box 0.2 L
Oil bath air cleaner 0.5 L
STANDARD EQUIPMENT
Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I, Cat I & II balls. Check Chains, Stabilizer Chains, Spring suspension seat, Flat top fenders & Operator’s manual
OPTIONAL EQUIPMENT
Front end weights, Swinging Drawbar, Sun Canopy, Pintle Hook and 9 hole drawbar